N8UDK ATV Repeater Commands

N8UDK ATV Repeater Commands

(04/03/1998)

Remember these commands are in addition to the normal repeater mode. No knowledge of the DTMF codes is required to use the ATV repeater in normal repeat mode. Just turn on your 439.25 AM or 2.4 GHz FM transmitter and the repeater will retransmit your picture and audio on 1253.25 AM!

DTMF

Action (using control channel 1)

1
439.25 MHz ATV input

2
2.4 GHz ATV input

3
Room camera (on servos)

4
Fixed outdoor color camera viewing rotor cameras

5
B/W outdoor camera with 10x zoom (on rotor)

6
Color outdoor camera with 10x zoom (on rotor)

7
Colorbar generator

8
ID (Elktronics)

9
Telemetry (on blue background, press 9 again and telemetry overlaid with camera 3)

DTMF

Action (using control channel 1) – followed by * = on, # = off (except B and D commands)

00
Force 1253.25 MHz transmitter on/off

01
Audio #1 -- (439.25 MHz ATV input audio)

02
Audio #2 -- (2.4 GHz ATV input audio)

03
Audio #3 -- (Control channel 1 audio) Mutually exclusive with 04

04
Audio #4 -- (Control channel 2 audio) Mutually exclusive with 03

05
Audio #5 -- (Room microphone)

06
Audio #6 -- (1000 Hz tone)

A0
Force (alternate) 434.00 MHz transmitter on/off
(Video sources 1, 2 and all audio sources except 05 are disabled)

A1
AC1 device -- (Room lights)

A2
AC2 device -- (Rotor / rotor DTMF module)

A3
AC3 device -- (EMPTY)

A4
AC4 device -- (EMPTY)

Bx
Playback DVR message x (1 through 8) -- (e.g. B1 will play 1^st DVR message)

B91

Color generator -- Up arrow button

B92

Color generator -- Down arrow button

B93

Color generator -- Enter button

B94

EMPTY

B95

EMPTY

B96

2.4 GHz receiver channel selector

B97

2.4 GHz antenna rotor -- CCW

B98
2.4 GHz antenna rotor -- CW

C2
Allow 2.4 GHz ATV sync signal to activate 1253.25 MHz transmitter

C4
Allow 439.25 MHz ATV sync signal to activate 1253.25 MHz transmitter

DDD
Turn on/off 2.4 GHz NASA channel (Doesn't’t require * or #)

DTMF

Action (using control channel 2)

1
Outdoor rotor tilt up (use with camera 5 and 6)

2
Outdoor rotor tilt down (use with camera 5 and 6)

3
Outdoor rotor clockwise (use with camera 5 and 6)

4
Outdoor rotor counter-clockwise (use with camera 5 and 6)

5
Camera 6 zoom in

6
Camera 6 zoom out

7
Camera 6 focus in

8
Camera 6 focus out

9
Indoor rotor counter-clockwise (use with camera 3)

*
Indoor rotor clockwise (use with camera 3)

0
Indoor rotor tilt up (use with camera 3)

#
Indoor rotor tilt down (use with camera 3)

A
Camera 5 zoom in

B
Camera 5 zoom out

C
Camera 5 focus in

D
Camera 5 focus out

DTMF	Action (using control channel 1)
1	439.25 MHz ATV input
2	2.4 GHz ATV input
3	Room camera (on servos)
4	Fixed outdoor color camera viewing rotor cameras
5	B/W outdoor camera with 10x zoom (on rotor)
6	Color outdoor camera with 10x zoom (on rotor)
7	Colorbar generator
8	ID (Elktronics)
9	Telemetry (on blue background, press 9 again and telemetry overlaid with camera 3)

DTMF	*Action (using control channel 1) – followed by = on, # = off (except B and D commands)**
00	Force 1253.25 MHz transmitter on/off
01	Audio #1 -- (439.25 MHz ATV input audio)
02	Audio #2 -- (2.4 GHz ATV input audio)
03	Audio #3 -- (Control channel 1 audio) Mutually exclusive with 04
04	Audio #4 -- (Control channel 2 audio) Mutually exclusive with 03
05	Audio #5 -- (Room microphone)
06	Audio #6 -- (1000 Hz tone)
A0	Force (alternate) 434.00 MHz transmitter on/off (Video sources 1, 2 and all audio sources except 05 are disabled)
A1	AC1 device -- (Room lights)
A2	AC2 device -- (Rotor / rotor DTMF module)
A3	AC3 device -- (EMPTY)
A4	AC4 device -- (EMPTY)
Bx	Playback DVR message x (1 through 8) -- (e.g. B1 will play 1^st DVR message)
B91	Color generator -- Up arrow button
B92	Color generator -- Down arrow button
B93	Color generator -- Enter button
B94	EMPTY
B95	EMPTY
B96	2.4 GHz receiver channel selector
B97	2.4 GHz antenna rotor -- CCW
B98	2.4 GHz antenna rotor -- CW
C2	Allow 2.4 GHz ATV sync signal to activate 1253.25 MHz transmitter
C4	Allow 439.25 MHz ATV sync signal to activate 1253.25 MHz transmitter
DDD	Turn on/off 2.4 GHz NASA channel (Doesn't’t require * or #)

DTMF	Action (using control channel 2)
1	Outdoor rotor tilt up (use with camera 5 and 6)
2	Outdoor rotor tilt down (use with camera 5 and 6)
3	Outdoor rotor clockwise (use with camera 5 and 6)
4	Outdoor rotor counter-clockwise (use with camera 5 and 6)
5	Camera 6 zoom in
6	Camera 6 zoom out
7	Camera 6 focus in
8	Camera 6 focus out
9	Indoor rotor counter-clockwise (use with camera 3)
*	Indoor rotor clockwise (use with camera 3)
0	Indoor rotor tilt up (use with camera 3)
#	Indoor rotor tilt down (use with camera 3)
A	Camera 5 zoom in
B	Camera 5 zoom out
C	Camera 5 focus in
D	Camera 5 focus out